Tax Deduction Info on www.Section179.Org!

New Powder Coating Equipment > Pressure Washers & Wash Stations


There are really only two options available for chemical pretreatment….pressure washers and steam generators. After looking at the pros and cons of each, we feel that a steam generator is hands down the better option.

  • OVERSPRAY IS MINIMIZED RESULTING IN A SMALLER WASH STATION
    As seen in the video, not much overspray is required to be contained.
  • LESS WASTE WATER NEEDING TO GO TO DRAIN
    More and more municipalities are requiring you to chemically treat your waste water before introducing it into the sanitation system. When you lower the amount of waste water produced, you lower the amount of chemicals required to neutralize!  
  • LOWER CHEMICAL USAGE
    When you lower the amount of water coming out the end of the washer, you lower the amount of chemical that is being washed away. Don’t worry, these washers deliver just the right amount of chemical to achieve the proper amount of pretreatment required without wasting expensive chemical!
  • FASTER DRYOFF TIMES
    The elevated temperatures of the water being used with a steam generator allow for faster drying times and sometimes do not require any time for drying at all! This can result in faster production times, lower energy usage for dryoff or both!

We have been in the finishing industry for over 25 years and seen many changes in that time, some good and some not so good.

If you are looking for a company to help you navigate through all of the options out there or if you already know what you want and are looking for an experienced company to help make it happen… our experienced sales engineers, designers and installers are here to help! 

Contact us today!

  • STAINLESS STEEL
  • MILD STEEL
  • POLY
  • CUSTOM DESIGN

 

We refurbish washers too!

Description: P:\Buy Rite Finishing\Advertising\Edje Technologies\Navigation Pages (Husker)\Auto Powder Coating\5 - Washers\DSC03260.JPG Description: P:\Buy Rite Finishing\Advertising\Edje Technologies\Navigation Pages (Husker)\Auto Powder Coating\5 - Washers\new.JPG

For more information, please email or call us at 888.647.9929.

For those times where a permanent wash station isn’t the best option we offer you an alternative!

  • WELL CONTAINED WORK AREA
    Rigid steel sides extend up 6’ and are fully sealed to prevent water spray from escaping into shop area
  • WORK AREA IS KEPT FREE FROM MIST AND STEAM
    Fan keeps overspray and mist from filling up the wash station allowing the operator to see the product
  • STAND ALONE UNIT WORKS WITH VIRTUALLY ANY MANUAL TYPE WASHER
    12” deep tank and simple outside access allows ample room for water to be captured and treated prior to introduction into the waste stream.     
  • PORTABLE AND EXPANDABLE
    Wash station is completely contained and above ground level with no building or concrete work required. Available in varying sizes, can be used together to achieve most any size station
  • SAFE AND STURDY PLATFORM
    Specially treated fiberglass grating creates a non-slip surface while providing excellent weight capacity for operators and product   
  • BETTER VISIBILITY
    Optional lighting and “white” coated panels offer better visibility 

For more information, please email or call us at 888.647.9929.