As factory representatives for KCI Powder Equipment we are often called upon to demonstrate the quality, ease of coating and user friendliness of KCI Manual Powder Guns. Typically, once the customer uses these guns they won’t let them leave and just have to have them. Recently we were asked to perform a demo installation for a Fortune 500 company here in the Midwest, they had heard about the powder savings with KCI Powder Guns and wanted to see for themselves and possibly replace their current powder guns. We brought the KCI Powder Equipment into their facility, hooked them up to electricity (simple 120V) and air (85 PSI) and let the operators start spraying with them. They raved at how light and well balanced the guns were and how easy the dials were to read and understand versus their current Powder Coating Guns.
The test run was on a very common project that usually takes almost 40 pounds with their current Powder Equipment. We hooked the KCI Powder Coating Guns into their system and were able to coat the same project with a 43% savings on Powder Usage, we were able to do it quicker with no line stoppages or recoats and we achieved the same quality results
These results are not uncommon. You can contact us at 888-647-9929 or go to our website at www.buyritefinishing.com to setup your own in-house trial. If you choose to email us, you can do so at firstname.lastname@example.org or email@example.com.