Powder Coating | Liquid Painting Systems | Equipment

We supply the RITE equipment
to help you coat the RIGHT way.

Blog

Category Archives: Powder Coating Washers

Liquid Painting vs. Powder Coating

by Eric | Published May 5, 2020

Liquid Paint is made up of a few basic materials and additives depending on the desired finish or requirements.
All Liquid Paints will have a carrier, a water or solvent that [ more ]

Also posted in Powder Coating Guns

Liquid Painting vs. Powder Coating

by Eric | Published May 5, 2020

Liquid Paint is made up of a few basic materials and additives depending on the desired finish or requirements.
All Liquid Paints will have a carrier, a water or solvent that [ more ]

Also posted in Powder Coating Guns

Manual Overhead Conveyors for Batch Powder Systems

by Eric | Published April 28, 2020

Batch Powder Coating Systems have both good and bad qualities. They are very cost effective to purchase and operate, plus they are very flexible and can process many different types [ more ]

Electrode Holder Maintenance

by Eric | Published October 7, 2019

In the video below, we detail the components, function, and proper maintenance checks for your Wagner PEM-X1 gun Electrode Holder. We appreciate you taking the time to watch, and hope [ more ]

Also posted in Powder Coating Guns

Powder Sieves commonly used for powder coating

by Eric | Published January 7, 2019

A sieve is often used in a powder coating system to help eliminate contamination and rejects. Sieves are used quite often in automatic powder coating systems, and it is very [ more ]

Powder Coating Consultation

by Eric | Published October 11, 2018

Recently we got a call from a major manufacturer of automotive components looking for help with their Powder Coating Operation.
They had just recently changed their Powder Filters but powder was [ more ]

Powder Coating and Painting Consultation, System Audits and Appraisal Services

by Eric | Published September 24, 2018

Buy Rite Finishing has over 75 years of experience providing solutions and answers for the Metal Finishing Industry, and as a trusted name in that industry, we offer Consultation, Evaluation [ more ]

Also posted in Powder Coating Guns

Quick Color Changes in under 30 seconds

by Eric | Published September 6, 2017

I learned to powder coat back in 1986 on an old powder coating unit with square hoppers. Back then we didn’t have any fancy equipment to help us powder coat, [ more ]

Pre-Engineered Blast Room

by Eric | Published June 8, 2017

A Pre-Engineered Blast Room has all of the essentials for an OSHA compliance blast room at a fraction of the cost. They are an attractive alternative to makeshift enclosures or [ more ]

Refill your Blast Pot the quick and easy way

by Eric | Published June 8, 2017

Complete Vacuum Recovery System
With a Vacuum Recovery Systems (VRS) you can quickly recover media to all Empire SuperBlast® portables, or any sandblasting pot with a diameter of 18, 24 or [ more ]

1 2 3 5