Plural Component Paints use two or more components to create a chemical reaction which causes the paint to harden. There are many reasons as to why a Plural Component Paint System is better than hand mixing!

EFFICIENCY

Coating Materials can be hand mixed, but it is difficult to determine how much will be required for a specific job. This leads to over mixing,,,,,plus it’s just messy!

With a Plural Component Paint System you can increase efficiency and production due to quicker dry times.

BETTER PRODUCT

A Plural Component Paint System produces a better product with excellent durability, abrasion resistance, chemical resistance, flexibility, adhesion and appearance.

CLEAN UP

Time is Money, you should be spending it painting parts instead of mixing paint. Material left in the hose & gun must be cleaned out prior to expiration of the Pot Life, a Plural Component Paint System is easy to clean up, you just flush it out and shut it down.

With a Gun Flush Box, cleanup is even easier. The Gun Flush Box automatically flushes out the system when the pot life has been reached.

REDUCE LABOR, WASTE AND CONSERVE RESOURCES

With a Plural Component Paint System the material does not become mixed until right before it enters the hose.

You don’t need to mix up a large batch of material, just to spray half of it and throw the rest away.

INCREASED PRECISION AND REPEATABILITY

A Plural Component Paint System SAVES YOU TIME AND MONEY by preventing mistakes and inaccuracy. No more costly mistakes caused by spraying off-ratio or from inconsistent mixing.

DECREASED REWORK

Typically mistakes aren't found until the production line has run for several hours, or even worse, when the final product is out in the field. With a Plural Component Paint System your system cannot spray off-ratio.

SAFETY

Health & Safety concerns are important, a Plural Component Paint System will use less solvent, help reduce emissions and lower Volatile Organic Compounds (VOC's).